Speaker Audition
-
- Full Member
- Posts: 217
- Joined: Fri Mar 24, 2023 6:53 am
Speaker Audition
Back out to Cultured Audio again next Saturday.
The friend I went with for the Kudos Sigao Drive Crossover demo wants to go back and audition some speakers.
Think he has his eye on some ATC Floorstanders.
Will let you know as to how he gets on.
The friend I went with for the Kudos Sigao Drive Crossover demo wants to go back and audition some speakers.
Think he has his eye on some ATC Floorstanders.
Will let you know as to how he gets on.
DG…
One box is the future…
Main; Linn Selekt DSM: Edition Hub (Utopik / Organik) — Kudos Titan 606 (Active) — Kudos KS-1 — Netgear GS105 — CatSnake Ethernet — TP-Link Media Converter — MSHD / Supra Power Cable — Focal Elear — Dedicated Hi-Fi Mains
Office: PC — SMSL SU-1 — SMSL SA300 — Q Acoustics Q2010i — QED Interconnect / USB / Speaker Cables
One box is the future…
Main; Linn Selekt DSM: Edition Hub (Utopik / Organik) — Kudos Titan 606 (Active) — Kudos KS-1 — Netgear GS105 — CatSnake Ethernet — TP-Link Media Converter — MSHD / Supra Power Cable — Focal Elear — Dedicated Hi-Fi Mains
Office: PC — SMSL SU-1 — SMSL SA300 — Q Acoustics Q2010i — QED Interconnect / USB / Speaker Cables
-
- Full Member
- Posts: 242
- Joined: Thu Dec 29, 2022 1:09 pm
- Location: Mid Devon
Re: Speaker Audition
I auditioned a pair of ATC 40A's during my new speaker quest a few years ago so I would be interested in hearing how your friend found them. When I auditioned them I found them very detailed which i liked but they sounded harsh and far too bright with little warmth so they were tiring to listen to for more than a couple of LPs. For the demo they used a Selekt level LP12 and a Selekt dsm and as I use Linn gear myself I knew the source would 'fit' my ears.
Linn LP12 keel karousel tramp, Urika 2, ARadikal2, Ekos se/1, dv-Karat 17dx
Linn Akdsm3 with Utopik
Goldnote PA10x2 (run as mono blocks)
Heed Obelisk dt dat
Kudos 606 + ks1
Various Audioquest tellurium and ifi connects
Linn Akdsm3 with Utopik
Goldnote PA10x2 (run as mono blocks)
Heed Obelisk dt dat
Kudos 606 + ks1
Various Audioquest tellurium and ifi connects
-
- Full Member
- Posts: 363
- Joined: Thu Jan 18, 2024 2:25 pm
- Location: Hamburg
Re: Speaker Audition
A friend has the ATC 40A's paired with a McIntosh C22 Mk. V preamp and a Thorens TD1600 turntable. Nothing harsh or bright there, very pleasant in fact. The ATC SCM100A's we listened to in the shop (with a Naim Turntable and preamp) are some of the best speakers I've ever heard.Grandad_Matt wrote: ↑Sun May 05, 2024 12:37 pm I auditioned a pair of ATC 40A's during my new speaker quest a few years ago so I would be interested in hearing how your friend found them. When I auditioned them I found them very detailed which i liked but they sounded harsh and far too bright with little warmth so they were tiring to listen to for more than a couple of LPs. For the demo they used a Selekt level LP12 and a Selekt dsm and as I use Linn gear myself I knew the source would 'fit' my ears.
Linn LP12 (Karousel)/Keel/Klimax Radikal 2/Urika/Ekos 2/Kandid/Linn Akurate DSM Katalyst/QNAP 219P II/Cisco WS-C2960-8-TC-L/Linn Akurate Tuner/1 x Majik 6100 & 1 x Majik 4100/Linn Akubarik (aktiv), Grado PS500e
-
- Full Member
- Posts: 242
- Joined: Thu Dec 29, 2022 1:09 pm
- Location: Mid Devon
Re: Speaker Audition
I must admit I was suprised that they sounded as they did to me during my demo because ATC has a very good reputation both as studio and home speakers. I know everyone's ears are different and it could be they just didn't suit me I gave them a good 2 hours but in the end it was what it was. Life would be boring if we all liked the same thingTendaberry wrote: ↑Tue May 07, 2024 3:55 pmA friend has the ATC 40A's paired with a McIntosh C22 Mk. V preamp and a Thorens TD1600 turntable. Nothing harsh or bright there, very pleasant in fact. The ATC SCM100A's we listened to in the shop (with a Naim Turntable and preamp) are some of the best speakers I've ever heard.Grandad_Matt wrote: ↑Sun May 05, 2024 12:37 pm I auditioned a pair of ATC 40A's during my new speaker quest a few years ago so I would be interested in hearing how your friend found them. When I auditioned them I found them very detailed which i liked but they sounded harsh and far too bright with little warmth so they were tiring to listen to for more than a couple of LPs. For the demo they used a Selekt level LP12 and a Selekt dsm and as I use Linn gear myself I knew the source would 'fit' my ears.
Linn LP12 keel karousel tramp, Urika 2, ARadikal2, Ekos se/1, dv-Karat 17dx
Linn Akdsm3 with Utopik
Goldnote PA10x2 (run as mono blocks)
Heed Obelisk dt dat
Kudos 606 + ks1
Various Audioquest tellurium and ifi connects
Linn Akdsm3 with Utopik
Goldnote PA10x2 (run as mono blocks)
Heed Obelisk dt dat
Kudos 606 + ks1
Various Audioquest tellurium and ifi connects
-
- Full Member
- Posts: 576
- Joined: Sun Jan 21, 2024 10:49 pm
Re: Speaker Audition
Sometimes speakers that can sound fantastic are very difficult to get right in one’s own listening room. I love Magnepan speakers, but they simply don’t work in a smallish cottage.
I liked ATCs when I heard them, but in the end went for Spendor. I guess I like that BBC presentation. In the end speaker choice is an extremely personal thing and a home audition essential.
I liked ATCs when I heard them, but in the end went for Spendor. I guess I like that BBC presentation. In the end speaker choice is an extremely personal thing and a home audition essential.
Gramophone: Linn Klimax LP12, ADSM/3+KCT & Spendor D9s
Juke Box: JRiver, Chord Blu2/Dave/Etude & Harbeth P3ESR-XD
Wires: Van Damme speaker leads, Canare & Linn interconnects
Network: Eero Router, HP Switches, Connectix Cat6a & BJC Cat5e
Juke Box: JRiver, Chord Blu2/Dave/Etude & Harbeth P3ESR-XD
Wires: Van Damme speaker leads, Canare & Linn interconnects
Network: Eero Router, HP Switches, Connectix Cat6a & BJC Cat5e