Linn speaker development

... and it comes out here
Kiwimac
Posts: 7
Joined: Sun Sep 29, 2024 10:35 am

Re: Linn speaker development

Post by Kiwimac »

Hi All

Found my way here (eventually!) from the Wam.

I am intrigued by the 150’s. I’m currently running the original Selekt hub through an Exaktbox-I to M140’s on the upgraded bases.

It’s a great system but IMV lacks bottom end. You can hear the bass but certainly can’t feel it unless listening at unpleasantly high volume.

Do you think the 150’s would be a worthwhile upgrade - and is it ok to run only six channels from 8 on the Exaktbox if I do?
User avatar
timster
Full Member
Posts: 1,288
Joined: Wed Oct 17, 2018 7:22 pm

Re: Linn speaker development

Post by timster »

Kiwimac wrote: Sun Sep 29, 2024 10:45 am Hi All

Found my way here (eventually!) from the Wam.

I am intrigued by the 150’s. I’m currently running the original Selekt hub through an Exaktbox-I to M140’s on the upgraded bases.

It’s a great system but IMV lacks bottom end. You can hear the bass but certainly can’t feel it unless listening at unpleasantly high volume.

Do you think the 150’s would be a worthwhile upgrade - and is it ok to run only six channels from 8 on the Exaktbox if I do?
Yes and yes. 150s are rated down to 38Hz cf 55Hz for the 140s. I run only 4 channels of my Exaktbox10. There will be filters etc. for your Exaktbox running 150s.
♫ ♫
Turntable: Rega RP1/Bias 2/Carbon
Digital Music Source: QNAP HS-251+ SilentNAS
Pre-amp/Streamer: Linn Selekt DSM (U)
DAC and Digital Xovers: Linn Akurate Exaktbox10/Kat (U)
Amplification: Linn Akurate A4200/1 (D)
Speakers: Kudos Super20a
Sub-Bass: REL T5
Sundries: Linn Silver Interconnects, Kudos KS-1 Speaker Cable
♫ ♫
User avatar
timster
Full Member
Posts: 1,288
Joined: Wed Oct 17, 2018 7:22 pm

Re: Linn speaker development

Post by timster »

BTW, do you use Space Optimisation? If you do, have you tried moving the Preference slider up a bit? Could release a bit more bass.
♫ ♫
Turntable: Rega RP1/Bias 2/Carbon
Digital Music Source: QNAP HS-251+ SilentNAS
Pre-amp/Streamer: Linn Selekt DSM (U)
DAC and Digital Xovers: Linn Akurate Exaktbox10/Kat (U)
Amplification: Linn Akurate A4200/1 (D)
Speakers: Kudos Super20a
Sub-Bass: REL T5
Sundries: Linn Silver Interconnects, Kudos KS-1 Speaker Cable
♫ ♫
User avatar
akamatsu
Full Member
Posts: 721
Joined: Wed Jan 10, 2024 7:45 pm
Location: Vancouver area

Re: Linn speaker development

Post by akamatsu »

Is your original Selekt Dynamik or Utopik? If Dynamik, you know what to do. Also, the next wave of Utopik upgrades should be out soon (November?). So the Exaktbox-I could get the treatment. I know, not as exciting as new speakers, but I would think more impactful for less money. I've found the source to be the source of bass as well.
Linn Klimax LP12, Linn NG Klimax DSM hub (Utopik), Linn 360s

Michael
Kiwimac
Posts: 7
Joined: Sun Sep 29, 2024 10:35 am

Re: Linn speaker development

Post by Kiwimac »

akamatsu wrote: Sun Sep 29, 2024 6:11 pm Is your original Selekt Dynamik or Utopik? If Dynamik, you know what to do. Also, the next wave of Utopik upgrades should be out soon (November?). So the Exaktbox-I could get the treatment. I know, not as exciting as new speakers, but I would think more impactful for less money. I've found the source to be the source of bass as well.
Dynamik. In both boxes. And Katalyst in the Exaktbox.
Kiwimac
Posts: 7
Joined: Sun Sep 29, 2024 10:35 am

Re: Linn speaker development

Post by Kiwimac »

timster wrote: Sun Sep 29, 2024 11:36 am BTW, do you use Space Optimisation? If you do, have you tried moving the Preference slider up a bit? Could release a bit more bass.
I do. Yes I tried that but I felt that it smudged the detail and presence when I did.
Kiwimac
Posts: 7
Joined: Sun Sep 29, 2024 10:35 am

Re: Linn speaker development

Post by Kiwimac »

My dealer suggested adding a sub woofer rather than the new speakers - although none of the speakers are yet in the country so he admits he’s not heard them yet.
HiFi Kabin : Disclaimer